Frameless Glass
Build your Frameless Glass pool gate
Pick your hardware finish once. Your glass gate panel, Polaris soft-close hinges and magnetic latch are already selected below — add spigots, a hinge panel or more glass if you want to do the job properly, or untick anything you don't need. Hardware over $300 is delivered free anywhere in Australia; the delivered price updates as you go.
1. Pick your hardware finish
Match the spigots and hinges already on your fence. Every part below switches to this finish.
1. Your gate
Frameless Glass gate panel, 12 mm × 1200, soft-close hinge cut-outs
Pick the width to match your opening: 800, 850 or 900 mm.
Enduroshield gate panel, 12 mm × 1200
Same gate with the easy-clean Enduroshield coating.
Frameless Glass gate panel, 8 mm
For 8 mm systems only.
2. Hinges and latch
Polaris S155 soft-close hinges (pair)
Retrofit — fit your existing 8–12 mm glass. Glass-to-glass or wall/post-to-glass.
Glass gate magnetic latch
Glass-to-glass, wall-to-glass, or corner in/outswing.
Standard glass gate hinges (pair)
Spring hinges, no soft-close.
Premium soft-close glass hinges (pair)
Glass clamps
Join panels or fix a panel to a wall.
3. Spigots, panels and glass
Spigots
Two per panel. Core-drill or base-mount.
Hinge panel, 12 mm × 1200 (the panel the gate hangs off)
Frameless Glass panel, 12 mm × 1200
Any width from 100 mm to 1600 mm in 50 mm steps.
Frameless Glass raked panel (for slopes)
Retaining-wall glass panel, 12 mm
4. Fixings
Sika rapid-set grout
Sets core-drilled spigots in 30 minutes.
Coach screws (316 stainless)
For base-mount spigots into timber or masonry.
Not sure which mount, width or colour you have? Email a photo of your gate to admin@clickfencing.com.au or call 0497 701 834 and we will tell you exactly what to order.